- Understanding the Role of Geomembrane Liners in Waste Management
- Innovations in Geomembrane Liners for Water Management
- Geomembrane Liners: A Comprehensive Guide
- The Future of Geomembrane Liners in Civil Engineering
- Geomembrane Liners: Enhancing Landfill Stability
Manager:Alvin Wang
WhatsApp:+62 8983806051
Tel:+86 10-5797-1075
Email:steelwang@okorder.com
Address:3rd Floor, No.2 Building, No.1 Sanlihe Road
How many years can the fish pond anti-seepage geomembrane be used?
Fish pond geomembrane is especially suitable for situations where the soil cannot retain water. In some areas, the sandy soil is filled with water and will leak out in a short time. In this case, the cost of using anti-seepage geomembrane is more than the traditional anti-seepage foundation. Low, construction is faster, and later maintenance is more convenient.
How many years can the fish pond anti-seepage geomembrane be used?
The fish pond geomembrane is made of new polyethylene as the main raw material, and double-anti-resistant (anti-ultraviolet, anti-aging components) are added to greatly extend the service life.
0.4-0.5 mm is the common specification for fish pond geomembrane. As long as it is used properly, the underground service life can reach more than 20 years. The exposed part on the slope can be used for more than 6-10 years. The exposed part on the slope can also be covered with geotextile, and the service life will be longer. long.
How many years can the fish pond anti-seepage geomembrane be used?
The following introduces the precautions for the use of fish pond geomembrane and how to lay it: When renovating a new fish pond or an old fish pond, the bottom and slope of the fish pond must be cleaned up, such as small stones, tree roots, and reed roots. All must be cleaned up, otherwise it will take too long If it grows too long, coupled with the pressure of water, the membrane will be punctured.
Laying the fish pond geomembrane is actually very simple. As long as the front work is done well, the subsequent laying will be much easier. After digging a pond, first compact and smooth the slope and bottom. The best area is more than 2 acres.
Then measure the dimensions. After measuring the length and width of the bottom and the length of the slope, I can help you calculate the dimensions, or you can calculate how many square meters of membrane you can use.
The width of the fish pond geomembrane can be produced from 1 meter to 8 meters, and the length is arbitrary. After laying the geomembrane, overlap it by 10-15 centimeters. Use a welding machine to weld the membranes and weld all the membranes into a whole to achieve better results. Good anti-seepage effect.
- Previous:no more
- Next:Factors to note when using geomembrane in winter
-
2024-12-05Geomembrane Liners: A Comprehensive Guide